Tips For Replacing a Window Handle
It is easy to replace your window handle in the convenience of your own home. Follow these steps to ensure an elegant and smooth finish.
Take off the screw covers from your uPVC handle to reveal the screws. Make sure you measure the spindle in order to make sure you are getting the correct size replacement.
1. Take a measurement of the Spindle Length
If you're replacing a window handle, it's important to determine the dimensions of the spindle correct. It can affect the tightness or elasticity of the handle, as well as whether the handle will lock correctly into the window frame. The spindle is a steel shaft that connects the handle to the lock in the window frame. The spindle can be either an industry standard cross-section of 8mm or older 9mm versions. Modern industry standards are 8mm, however it wasn't always this way. It is essential to verify the measurements prior to purchasing the handle you want to purchase.
The easiest method of measuring the spindle length is to remove the existing handle and this can be done by turning it into the open position and unscrewing the two screws (which might be hidden behind plastic caps that will have to be removed) which hold the handle. Once the handle is removed, measure the distance from the base to the point at which it ends. This will provide you with the measurements required to purchase a replacement.
There are many options available when you are looking to pick the right window handle. From sleek chrome that will fit into a modern home to traditional burnished bronze that looks beautiful in restored Georgian rooms, or even the more classic Tudor Cottages with mongoose tails curled. The options are endless but the most important thing is to select a style that is suitable for your home.
Espag handles are generally installed to uPVC windows and are always identical in size, with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, ranging from 58mm to 62mm. Cadenza window handles are different in size since they have an angled blade which operates with a multi-point locking mechanism within the window.
When selecting a window handle it is important to consider the hand you use to open your door. Inline Espag window handles aren't hand-operated and can be used on right or left handed windows. Cranked window handles are hand-operated and are only used on windows that open in one direction.
2. Remove the Handle
A window handle that is sagging is a frustrating experience, regardless of whether the handle is damaged or worn out. The good news is, you can fix a uPVC handle by yourself. All you need are some basic tools and a bit of time to complete the task.
First, you must open the window and make sure it's not locked. Then, take off the screw caps that hold the handle in position. Once these are removed, you can begin working on removing the handle itself.
The handle is connected to a spindle in the window frame. Based on the type it is held in place either by a screw or pin. The most popular handles are the inline Espagnolette and cockspur handles. Both kinds of handles are found on casement windows, as well as aluminium ones. They can be locked using keys to stop unauthorised opening of the window from the outside, or you can lock them by turning the handle clockwise.
To remove the handle you will need to use a screwdriver with a flat blade to remove the clip that holds the handle in place. After the clip has been released, the handle should slide off the spindle. Once the old handle is removed, you will have to determine the length of the spindle in order to make sure that the new handle is compatible with the spindle's length.
Once you have decided on the correct size for the handle, you can screw it into place. It is crucial to make sure that the handle is securely fastened and that it rotates in the proper direction (clockwise when the handle is open or counterclockwise if the handle is closed). It is crucial to ensure that the handle hasn't been installed upside down.
In the end, you must replace the screw cap caps. After you have completed this step, you are able to test the handle to make sure it is working correctly. You should also test the locking mechanism by moving the handle until it is locked position, and then back to the locked position.
3. Take off the Screws
A uPVC window handle is an integral part of any home and is usually the first thing to show signs of wear and wear or damage. This can be due to natural factors, regular usage, or even deliberate damage by criminals who want to gain access to your home. A simple repair can fix the issue and prevent it from occurring again.
uPVC handles may also be difficult to remove if the locking mechanisms are not working properly. It's often possible to solve the issue by replacing the multipoint locking mechanism, rather than the whole handle. This can save you money.
After removing the old handle, you'll have to remove any screws that held it in place. These screws are usually found on the inside of the base of the handle. You may require a screwdriver to accomplish this and it's important to not over tighten the screw as this could cause the handle to become loose.
You'll then have to locate the fixing pins or screws that hold the new handle in place. These are usually located on the inside of the handle base. You'll need a screwdriver to take them off. If you'd like to replace them, you should replace the caps on the screw and test the handle to make sure it is working properly.
When you're ready for installing the new handle, simply line up the spindle with the cut-out in the window mechanism and screw it into the appropriate position. Make sure that the handle is in an open position and that the screws are securely secured prior to replacing the screw covers if you wished to do so. Then you can enjoy the new window handle. Hopefully this will help you to save money on window and door replacements in the future. Contact us if you need more information on this or any other aspect of your uPVC window.
4. Fit the New Handle
The procedure of replacing a damaged window handle or updating it is simple and can be accomplished in a few easy steps. Identifying the type of window handle, measuring its spindle length, and knowing what tools you'll require to finish the job are crucial. Always consider the safety of your windows and tools. upvc door handle is also essential to take your time and follow the steps to ensure you have a working handle that is safe to use.
To begin, find the screws that hold your window handle. Remove these while holding the handle firmly to prevent it from falling down and causing injury. After the screws have been removed they can be repositioned in a safe spot to be replaced in the future.
After you have removed the handle, you are now able to put in your new one. It is essential that the handle fits perfectly to ensure that it works properly and locks the window in position. Next, slide the square metal bar attached to the handle into the window mechanism hole.
The final step is to replace the caps on the screws and test the handle to make sure it works. If you aren't satisfied with the result or if the window doesn't open and close as it should then the next step is to contact our experts who can help.
Most UK homes are equipped with uPVC Windows. As such, many will require replacement at some point due to wear and tear or breakage. The procedure is fairly simple and can be done by anyone with a bit of knowledge of DIY. The most important aspect in the success of this procedure is making sure you're using a replacement handle which matches your existing window in terms of size and design. Contact our team if you are unsure of the type of handle that you need. They will be able assist you with all of the options.